MISCELLANEOUS MACHINERY AND EQUIPMENT
Ajax Magnethermic 25 TPH 5" Billet Heating Line
RHBH-202680
New: 1987. In operation until 2003.
Material: Various stainless steel alloys, Nickel based alloy initial Temperature 70°F (ambient) Final Temperature 2,375°F
Uniformity: 25°F on bar surface end to end at coil exit. Except for leading and trailing bars.
Bar Size: 3" - 5" rounds or 3" to 5" squares.
Bar Length Range: 10 to 30 feet
Bar Weight: 1,200 lb (max)
Bar Surface: As cast. Protective coatings may be used.
Production Maximum: 25 TPH. Some grades that are heated to higher temperatures or have different heating characteristics will reduce production rates,
Hille In-Line Water Quenching System
CLBC-202480
New: 1987. In operation until 2003.
Bar diameter processed: .75" - 2.25"
Max. bar speed: 5.2 m/s through dry tubes and 2.6 m/s through flooded tubes
Number of tube assemblies: 11
Number of trough assemblies: 11
Number of roll assemblies: 12
All tubes, throughs and rollers are submerged in a water tank divided into four sections. The line can be used with water drained for non-cooled products or with water running in tubes only or in fully submerged mode.
Exiting bar is pulled out of the tank by a Pinch Roll located outside the exit side of the tank.
Shibaura Deep Hole Drilling Machine
DLDH-202845
Manufacturer: Shibaura (Japan)
Max. Piece Length: 20 m (65'7")
Max. Piece Diameter: 3,200 mm (126")
Max. Piece Weight: 200 MT (441,000 lbs.)
Range of Drilling Diam.: 70 - 500 mm (2.76" - 19.67")
Range of Counter Boring: 70 - 560 mm (2.76" - 22")
Special Counter Boring: 560 - 1,000 mm (22" - 39.37")
Control System: Fanuc
Machine is still installed. It is complete with 3 and 2 point supports, extensive tooling, hydraulics, chip conveying, drives and controls.